Network control register
LOOPBACKLOCAL | Loopback local |
ENBRX | Receive enable |
ENBTX | Transmit enable |
MANPORTEN | Management port enable |
CLRALLSTATSREGS | Clear statistics registers |
INCALLSTATSREGS | Incremental statistics registers |
STATSWREN | Write enable for statistics registers |
BACKPRESSURE | Back pressure will force collisions on all received frames |
TXSTRT | Start transmission |
TXHALT | Transmit halt |
TXPFRMREQ | Transmit pause frame |
TXPFRMZERO | Transmit zero quantum pause frame |
STORERXTS | Store receive time stamp to memory. |
PFCENB | Enable PFC Priority Based Pause Reception capabilities. |
TXPFCPRIORPFRM | Write a one to transmit PFC priority based pause frame. |
FLUSHRXPKT | Flush the next packet from the external RX DPRAM. |
TXLPIEN | Enable LPI transmission when set LPI (low power idle) is immediately transmitted. |
PTPUNICASTEN | Enable detection of unicast PTP unicast frames. |
STOREUDPOFFSET | Store UDP / TCP offset to memory. |
ONESTEPSYNCMODE | 1588 One Step Sync Mode. |
PFCCTRL | Enable multiple PFC pause quantums, one per pause priority |